amid Posted August 9, 2014 Report Share Posted August 9, 2014 How to replace the proportioning valve in hybrid? Cars My passion If you like my above post, please press Like / Thanks on right side to help me increase my rating Link to comment Share on other sites More sharing options...
bhushandxb Posted August 11, 2014 Report Share Posted August 11, 2014 To replace the proportioning valve, park yur car on the level ground. You need to raise the front platform of your car. Do it unsing the jak and make sure to lock the jack so thatthere is not accident because of the slip of the jack. After ajusting the jack and the stand, locate the propotioning valve under the car. During the replacement of your valve, you can clean the surface also as you may not do it on regular basis. Check if there is any leak from the proportioning valve.Remove the wiring harness and push the valve from the car and disconnect it. You also have to unscrew all the bolts from the valve. Take your new valve, and connect it the same way to disconnected the old valve. But make sure, the new valve is as per specified in the manual of your car. Connect the harness back and screw the bolts. To ensure if the valve is working fine, bleeding the brakes will help. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now