Jump to content
  •  
Advertise here

how do i do it myself i want to change the starter of Civic?


zacky

Recommended Posts

For Removing the Starter:-

1. Disconnect the battery cables

2. Remove exhaust pipe A and the inlet manifold bracket

3. Remove the harness clamps and connector from all the clamp.

4. Remove the two bolts securing the starter and remove it from the engine.

5. Disconnect the starter cable from terminal and even the connector from terminal and remove starter.

Now to install it back on:-

1. Install the starter cable and connector. Crimp the starter cable from the side of the ring terminal.

2. Install the starter and loosely install the upper lower mounting bolt after both are installed fist tighten the upper bolt and then lower

3. Install the harness clamps and connector on all clamps

4. Install the intake manifold bracket.

5. Install exhaust pipe a new gaskets and self-locking nuts are imp.

6. Connect the battery cables and start the car

Link to comment
Share on other sites

  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of use