Leaderboard

The noise feels like a rubbing noise or from the wheel bearing. Just check if the mud guards are not scrapping the tyre especially in the front. Do you have a skid plate for the front bumper? Reason I am asking is because the Pajero front bumper without a skid plate does tend to bend inside after a couple of off-road drives. See if you can get someone to sit with you and try to find out from which side of the car the noise is coming from. That might help to identify if it's a wheel bearing issue

Unless the donuts and shawarma are from last week's drive😂!

Hello friends, My Mitsubishi Pajero 3.5, LWB, 2017 makes an occasional noise and vibration which usually starts at lower speed, increases when I slow down and completely stops with a shudder when I brake. The sound is like the racing of a high speed car or motorcycle. You can hear the sound in this recorded video: https://youtu.be/a8v9BJ-X8eY?si=mrLyw4T7mBbBf-K3 I intentionally did not come to a complete stop while recording this video so that I can have a longer recording of the noise. At the end of the video, I come to a complete stop and the noise stops. (1:20) I have been to 3 garages including Al Habtoor but all of them ask me to recreate the sound during a test drive which is impossible to do as I have been unable to establish any correlation between the sound and any specific usage of the car. Yesterday I got my timing belt replaced by Al Habtoor and they had told me that maybe the sound would go away after that but lo and behold it occurred within 5 minutes of me taking the car out of their workshop. The following jobs were done on the car as a part of maintenance or service which did not fix the noise: All Disc skimming Front brake pad replacement Engine oil, filter replacement Steering column boot lubrication Brake cleaning All 4 tyres replaced (HT to AT) Wheel balancing and alignment These jobs were done over period of few months. None of these jobs fixed the noise problem. Also I have been on 3 newbie offroad drives but the problem has never occurred during off-roading. Apologies for the long post, I had to make sure I provide all the details because I am at my wit's end here. I will be going back to Al Habtoor but it would great if an experienced Carnity member can guide me in the right direction of what this noise could be. Thank you!

Hi @rroker.. I think they need to isoline first if noise is there while car is on “P” and play with engine to get it to higher RPM, if it is still there then this isolates all moving parts on wheels, brakes, suspension, and transmission and focus on engine and other moving parts like belts, rollers, or engine it self. if noise is not coming on that state then with extreme cautions and proper safety preparations they can put the cat on the lift to just barely take the wheels off the ground (few centimeters) and ensure the car is stable and then engage transmission and start accelerating to simulate the issue and identify where it’s coming from.. highest suspects will be wheel bearing, drive shaft, transfer case, or transmission itself. P.S. that last test need to be done by a very experienced person who ensures the car is fully stabilized on the lift before they engage the gear and will not change with vibrations once it’s engaged

how did "shwarma" get inserted into this request? If @Ishak & @DP1011 crave shwarma, we'll have to extend the drive from Nahel to Al Ain airport so lunch will be with shwarma 😂