Jump to content
  •  

akbar

Members
  • Posts

    45
  • Joined

  • Last visited

  • Carnity Points

    0 [ Donate ]

Everything posted by akbar

  1. check the motor that is installed in the Door they must be fault and even check the Fuse. it can be either of the two
  2. Looks like you need auto lock there in that door as it might be bad and thats why locking but not unlocking by itself. it wont cost much, its cheap.
  3. In dubai anyday Petrol is better due to very high price of diesel here due to commercial usage.
  4. Michellin latitude is very good but pricey.
  5. its damp moist smell right??? AC filter need change.
  6. It is entirely on your usage. Some people drive less and brakes more and that too hard brakings and eat brake pad every 3 months. Others drive sensibly and plan their drive and plan their brake in time and avoid hard braking and their brake pads last for 2 years.
  7. You cant remove it actually, but spray rust proofing compound in whole under body to prevent its growth.
  8. If it isnt import car then it shud be in warranty and let Al tayer guys fix it. If no warranty change the hazard switch, Ford cars usually have lot of electrical issue especially newer cars.
  9. No its fuse is blown not the indicator light, check fuse and change.
  10. Change the AC filter it will be fine, sometime filter change frequently is required if you are a smoker or have kids eating food a lot in car while AC is running, so smell keeps circulating and after sometime it becomes sticky.
  11. Its mighty beast, only fuck up is its size and you cant do anything about it. Dont cross the ridges in beginning much as you will be crested often, until you find right speed to cross over w/o massive jumps. Small jumps ok.
  12. I second to edino reply on this. Whinning have varies types and duration. Also they have differ in intensities of seriousness of whinning too. Do not ignore and drive or post here so that we can advise you further.
  13. low rpm and slow km missing is due to electrical part and common through out missing is engine malfunctioning. Check spark plug first, then doubt coils.
  14. There are plenty of garage in al quoz, rashidiya and in sharjah. Drive around and makes intelligent choice.
  15. Check all spark plugs, leads and coil for regular sparks delivery. It cud be one of these things may be faulty. Plugs Lead Coil Find and replace in same order from cheapest to most exp part.
  16. Check all fuses and relay, it may be bad.
  17. OBD II P0109 Fault Code Definition The Manifold Absolute Pressure Sensor/Barometric Pressure Sensor measures the rise and fall of the air pressure inside the Intake Manifold. This provides critical data needed for the Power Train Control Module (PCM) to control the Air Fuel Ratio, the Ignition Spark Timing, and many components of the Emissions Control Systems. The Manifold Absolute Pressure/Barometric Pressure Sensor converts the Intake Manifold air pressure into a voltage that is high when the Intake Manifold air pressure is high and low when the Intake Manifold air pressure drops to a vacuum. The P0109 code indicates an intermittent or erratic voltage signal from the MAP to the PCM. Symptoms * Check Engine Light will illuminate * In many cases, no abnormal symptoms may be noticed * In some cases, the engine may be hard starting and/or get poor fuel economy * In some cases, noticeably poor engine performance may occur Common Problems That Trigger the P0109 Code * Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is defective * Intake Manifold vacuum leaks * Faulty or corroded Manifold Absolute Pressure Sensor/Barometric Pressure wiring or connections Common Misdiagnoses * Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real cause is a vacuum leak * MAP Sensor is replaced when the real issue is a problematic EGR Valve * Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real problem is a defective Idle Air Control Motor, which causes a very low engine idle OBD II Code P0171 and P0174 Fuel System Too Lean (Bank 1 or 2) Our emissions expert has put together the following information about the P0171 and P0174 fault code. We have also included diagnostic procedures you can take to your repair shop if the mechanic is having difficulty analyzing the code. OBD II Fault Code * OBD II P0171 * OBD II P0174 Fault Code Definition * OBD II P0171 Fuel System Too Lean (Bank 1) * OBD II P0174 Fuel System Too Lean (Bank 2) Symptoms * Check Engine Light will illuminate * In some cases, no adverse conditions may be noticed by the driver * In other cases, there may be performance problems, such as a lack of power on acceleration and some "coughing" or misfiring * The vehicle may have trouble idling, especially when warm or when sitting at a stoplight Common Problems That Trigger the P0171 and P0174 Code * PCM software needs to be updated * Vacuum leaks (Intake Manifold Gaskets, vacuum hoses, PCV hoses, etc.) * Mass Airflow Sensor (MAF) * Plugged Fuel Filter or weak Fuel Pump * Plugged or dirty Fuel Injectors Common Misdiagnosis * Oxygen Sensors
  18. Send to dealer and see what they say as it will be done under warranty. It could be either of elcetrical malfuntioning like ABS or traction control when its cold, and when its slightly hot it becomes fine. Or it could be mechanical like drum, pads, brake fluid etc which i doubt as its only 7200 km done. Too early for mechanical fault.
  19. gear downshift n lo gear has some problem. Lo gear usually has a kick when you start, if its a similar jerk that you get on signal stop then get the Gear oil change it could be gear oil is dying and not operating with smooth shifts.
  20. You can get plenty of options from car accessories market n deira opp Hyatt, but its not very reliable and i wouldnt suggest any. Just for FYI cruise wont help in fuel economy, but yes it will reduce the fatigue for sure. Same fuel will be used if throttle is pressed by leg or by cruise, its same same.
×
×
  • Create New...

Important Information

Terms of use