Jump to content
  •  

ALKHATIB

Members
  • Posts

    6
  • Joined

  • Last visited

  • Carnity Points

    0 [ Donate ]

Profile Information

  • Interests
    offroading

Profile Fields

  • Location
    Ras Alkhaimah Kingdom

Social Profile

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

ALKHATIB's Achievements

New Joiner

New Joiner (1/14)

0

Reputation

  1. The seatbelt chime can be turned on or off by your dealer, given that they would agree to do it for you that is As another option, I've found this on another website a long time ago and saved the procedure on a word document. I never tried it but I remember that everyone who did try said it worked. Here goes: "NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or START position. The manufacturer does not recommend deactivating the Enhanced Warning System (BeltAlert). 1. Turn the ignition switch to the OFF position, and buckle the driver’s seat belt. 2. Turn the ignition key to the ACCESSORY/RUN position (engine does not need to be running) and wait for the Seat Belt Warning Light to turn off. 3. Within 60 seconds of starting the vehicle, unbuckle and then re-buckle the driver’s seat belt at least three times within 10 seconds ending with the seat belt buckled. 4. Turn the ignition key to the OFF position. A single chime will sound to signify that you have successfully completed the programming. The Enhanced Warning System (BeltAlert) can be reactivated by repeating this procedure. NOTE: Although the Enhanced Warning System (BeltAlert) has been deactivated, the Seat Belt Warning Light will continue to illuminate while the driver’s seat belt remains unfastened." Cheers! The Original Topic http://www.almost4x4.com/vb/showthread.php?763-Disable-The-Seat-Belt-Alarm-In-JEEP
  2. try to check the Transmission cooler Inside the radiator the better is fix External Transmission cooler outsaid the radiator
  3. for nice sound fix the borla for Performance use & more higt sound go for gepson
  4. Here's the final solution of the heat 1- Installation of oil cooler for the transmission behind the front bumper ( in Scrap about 50dhs ) 2-Separate transmission oil form vehicle cooler 3- Installation ( 2 Subaru )fan behind the front grille ( in Scrap about 80 dhs for 1pice ) 4- Connect the Engine electric fan to work with switch Because it does not work only after the temperature 110 5. Installation of new aluminum Radettor ( about 300 dhs ) 6. say goodbay for heating
  5. hi i'm mohammed alkhatib i'm form Jordan & live in Ras alkhaimah Kingdom i drive jeep wrangler Since 5 years now i ride my 2007 maroon jk with some Modified My interests is offroading & camping every weekend (Since 3 years ) hope see you all in desert my FB page www.facebook.com/M.alkhatib
×
×
  • Create New...

Important Information

Terms of use