Jump to content
  •  

ian

Members
  • Posts

    80
  • Joined

  • Last visited

  • Carnity Points

    100 [ Donate ]

Posts posted by ian

  1. When to replace? Its simple. Replace it when its broken. 

     

    How to replace? Follow the following steps:

     

    Before replacing it, remove the negative terminal of the battery

    At first, raise your vehicle from the front

    Then you need to drain the coolant and antifreeze from the radiator

    Now remove the hoses from the heater core

    You can lower your car back to the normal position.

    Now locate the heater cores and remove the mounting clamps of the same. 

    Remove the heater core and dry the carpeting by side.

    You can now install the new heater core as per guided and suggested by your dealer or as per mentioned in the car manual. 

     

    That's it!

  2. Awesome. Since the wheel bearing is too lose in your car, you need to tighten the hub nut on you wheel using the wrench. But do that after putting hand brake in your car. Then test drive your car to check the wheel bearing. Don't tighten it too much and the drive is too stiff. 

  3. Depends. If the fouling is because of the short distance driving, then justtake your car on the highway and drive on highway speed for 20 min. It will be fine

     

    If the fouling is really severe, then you need to remove the sprk plugs and clean it using the spark plug ceaner that will remove th dirt and sand blast from the spark plug. If that doesnt work, you need to get replaced my friend.

×
×
  • Create New...

Important Information

Terms of use