peter24

Always take care of the blind spot when you know they is a heavy vehicle near to your car. Also, never try to over speed or take over the heavy vehicle. Do not drive very close to the heavy vehicle to about any accident.

Ok. And can yu explain these positions.

Always use the fuel which is matching the viscosity that is recommended for your car.

Can someone describe the positions of the ignition switch.

The front end clunks in mazda2, 2010 model is gone bad. How to fix it?

How to quickly check the charging system of a car?

Well in that case, you need to own a smart phone. It can be any brand. Just download RTA app in that which acts as a free navigator in complete Dubai. You don't need a WiFi or data for this application. It works on satellite. And it navigates when you are in the car, or walking or even using a public transport. I suppose that can solve your issue.

I tried to find pocket navigation too. But it wasn't available anywhere.

Hey guys. How can I check my brake pads if they are working fine. I am not really good with cars. Do please let me know if I can actually perform such a task.

Hey people. The alternator in my Toyota Camry is not working. I need to change it. Can I do that on my own?

What are synthetic motor oils? And is it better than the ordinary oils?

My be the oil level in your car is low or may be the fluid is contaminated.

i like Infiniti better than Lexus as it is more reliable and comfortable.

Actually it completely depends on the type of dent. As you are mentioning that the dent is not that big, then I would suggest you to perform DIY. It’s easy and quick. You will need: hand gloves, hair dryer and dry ice or compressed air spray. Do as per the following steps: Take an aluminum foil and cover the dented area with that. Now, take a hair dryer. Don’t pressurize the area with too much hot air, so keep the hair dryer on the medium level and start drying the dented area (covered with foil). Do this for at least 10 min. when the car paint slowly starts melting. When the paint starts melting, it’s time for you to give the dented surface something cold. Put the gloves on and either you can use dry ice or compressed air spray. If you are using dry ice, spread the ice on the dented surface softly. If you are using the compressed air spray, spray it in the upside down motion. Continue doing this for 5 to 10 min., when you will start realizing that the dent is coming out. Finally you can remove the aluminum foil, and check the difference on your own. This method is really helpful when you are performing it on a small dent. If the dent is big, more pressure it required which is not possible by DIY and that’s why people give it to the workshop. This method is really common. The main criterion is to pressurize the surface by hot air and then cool air, which automatically force the dent to pop out. But don’t forget to wear gloves in your hands when you do this, because when using dry ice, it may damage the hand. To avoid that, gloves is the best alternative.

Traction is a term used to describe the tires performance on wet roads. When tires can divert the direction of water beneath them is knows as traction. Such tires help in lesser hydroplaning and smooth drive on a rainy day. It’s really important for tires to perform so on wet roads, otherwise the car may slip in the rain.

Always check for the treat wear on your tire. The traction process should always be followed by the tires. When you realize that the tire is unable to improve traction, you need to change it.

Great help. Thanks man! Can you also tell me the wiring codes for the speakers also?

Actually Both!

Does anyone know the wiring color codes in a car?

Infiniti InTouch is an amazing feature in Infiniti which comes with dual touch screen. One can add navigation as well in Intouch feature also. I saw it in my friend’s car. I really liked it. But I suppose intouch system is available in all cars now.

How and when can I know that my car needs a wax job?

i feel really sorry about you and your car. And trust me, this is the fourth time i am hearing this about G35 in this week. I drove G35 of my fried some days back and yes! i felt really strange driving that car. It was not smooth and the brake pads were really annoying. I just got down of the car as i was scared that i may end up in an accident.

Is it possible to remove the water from the contaminated gas. I recently took my car to the workshop, and they told me that the fuel tank is contaminated with dirt and water. I am sure about the dirt that it can be removed, but what about water?

Internal coolant leaking is really bad and expensive. Internal leaking is inside the engine where it is difficualt to check the leak and also the repair is not possible. The only solution to stop the leaking is to replace the part. Head gasket and ATF oil cooler are the two major places where internal leaking is noticed.