farooqmasudi

The Assembly Line Diagnostic Link (ALDL) Connector is located behind the center of Instrument Panel (I/P), below ashtray.

Good Luck

Its a stability program that control your vehicle wont spin or skid any tire and keep vehicle stable at all times and in all road condition.

It has a stability modulator that might be freaking. Better check the fuses and relay and then doubt expensive ones.

Occasionally non warming up car is fine, but usually 1 min warm up is all you need than 5 mis.

Secondly loud noise could be as you were in D and still moving and shifted to R so gear cried loudly as it supposed to be stop completely before shifting to R, as in D and R gear works exact opposite direction and it need to stop at zero kmph and then switch to other direction.

Hope you havent broken anything, if car is doing fine just forget about it and avoid such rush shifting in future.

check to see if your brake lights work if not then check fuses first and if fuses are good then change brake switch.

If the light do work you will need to change the solenoid in the shifter housing.

my BLS Cadillac 2006 is having a major problem the Engine oil is getting in engine coolant which is escaping though the radiator overflow container

. The engine oil level is droping significantly after a short drive. i got the radiator changed but the coolant-oil mixture is still escaping, and the oil level ist still not stable . what do i do