Jump to content

UAE Green Desert: Discover Spectacular Transformation After 75-Year Rainfall

edwardb

Members
  • Posts

    9
  • Joined

  • Last visited

  • Carnity Points

    0 [ Donate ]

Posts posted by edwardb

  1. Check the automatic transmission fluid (ATF) level and quality. The dipstick is toward the rear of the engine. It is marked ATF Engine Oil. Pull this dipstick out. Wipe it off with a clean paper towel. Look at the fluid on the paper towel. Transmission fluid needs replacing if it is brown. Fresh transmission fluid is translucent red. Replace the dipstick. Pull it out again and look at the level. It should be between the MIN and MAX lines.

    Refill the Transmission Fluid

    Locate the Engine specification sticker on the interior of the hood for the ATF specifications and check the ATF specifications. The sticker states the type of ATF (see Resources) and the amount needed for your vehicle. This varies according to year model and engine size. If you are unable to find the sticker, the information is also in the owner's manual.

    Find the ATF fill port. This is beside the dipstick. Remove the black cap marked ATF or Transmission Engine Oil.

    Put a funnel into the fill port. Pour the appropriate amount of ATF into the funnel. Check the level again. If it is low, add a little more ATF and recheck.

    Replace the black cap and tighten it. Close the hood. Start the vehicle and allow it to idle for 10 minutes to circulate the ATF.

×
×
  • Create New...

Important Information

Terms of use