tariqkhan

Can you please explain in detail

Its on the door dude!

There is electric short in my Q5, but i want to know the source of the same. How can I find it?

There is electric short in my Q5, but i want to know the source of the same. How can I find it?

What is PCM?

How much weight can a Lexus RX carry safely?

I have Optra from 5 years. Recently the cabin air filter is gone bad and need a replacement. I wanted to know if  I can replace the cabin air filter on my own?

Is it possible to modify the door handles? If yes, then can anyone suggest me a good workshop who can do that?

What type of engine problems are generally faced by any driver?

Thanks Bassim. I checked with Al Futtaim. Their deals are really good. But i would still browse around with other auto companies as well. And then whichever is best, i will go for that. 

I am not really sure about the difference between Yaris and Yaris Verso? What is it? Does anyone know about it?

I am looking for a jeep 4X4 segment car but a used one. Can anyone tell any jeep dealer who sells Jeep cars in a reasonable price along with insurance.

Hey people. Just a curious question. Can fuel be a reason sometimes when the car doesn’t start? If yes, then what are the possible reasons for it?

If the drain plug is stripped out, how do we remove that?

The outer shell of muffler is broken is my Carens, 2008 model. Can anyone tell me why it happened?

Brake shoe replacement is easy. But make sure that you wear gloves when changing the brake show.

First, park your car on a ground level and release the emergency break. Clog the front wheel if you are removing the shoe from rear wheel or vice versa.

Adjust the jack and pull the car up in order to remove the wheel.

Release the lug nuts from the wheel in order to remove the wheel. When you remove the wheel, you will see either drum or disc shaped covering the brake shoe. Remove that as well.

You need to remove the return spring using the brake tool.

Pull out the hardware and the brake shoes holding the retainer pin.

They will easily come out. Now install the new break shoes into the hardware and put it back on the tray.

Tighten it properly in order to avoid any loose part coming out when driving.

Put back the drum/disc shaped covering and install back the wheel.

Don’t forget the warranty dude! The day you repaint your car, the warranty expires that moment. 

Last time my friend was also asked to pay for the labor charge. He is pretty innocet, and he paid for the labor charge. When he showed me the bill, i shouted at him and told himt o clain against it. Its not fair. He went back to the dealer, and reported a complain against them. The executive officer then apologized to him for the same, but he did not get his money back. But out of all this mess, me and me hyfriend understood that one does not have to pay for the labor charge to your dealer if your car is under warranty issued by the same dealer.

I didn’t replace many things. The battery, brake pads and the catalytic converter.

if the car is not passed correctly then its the guy who is checking his fault and in a way the check is done to keep the drivers safe. get it re passed again and make sure u make a complaint.

I have had the most unbelievable experience when getting my 607 passing for renewal. the brakes were due for changing and so were the tires that was what the passing in tasjeel said and when i went to one next to wasal testing they cleared the car. HAHAHA i didnt know if i should be happy or worried. If they keep passing the cars like this then what is the point of getting the car checked before renewals or registrations.