ramesh

What is the price of changing front bushes.

To be honest, im driving civic since 2007 and never had such issue. Dont really belive on service advisor talks as many times they just say as its been told to them from their busy mechanic who have no time to bend under your car and get the axle boots, CV boots and joints inspected. Get car checked at outside competent garage in al quoz or rashidiya and i am sure you will able to fix this issue near tires and axle area.

200 AED he charged me and even cleaned the car.

My friend, this car is really goo for off road the trick is to be that you have to be good at it.

Seen one in blue too, that is much better than yellow.

when the car is driven too much this is very common that a little vibration will happen. so sometimes if the wheel balancing is done then it can solve the problem to an extend.

Choose anyone for such job, as its not technical and just mechanical job. Just bolt in and bolt out. http://www.hondadxb.com/workshop-garage-f24/general-purpose-workshop-garage-dubai-t318.html Buy foundation urself and get it changed with any half way decent garage.

What a great thread and what a great willingness to help. Three cheers for hisham_khan. Real gentlemen having patience to help and guide so much for so long, wish we have many members like him. GREAT JOB HISHAM. Keep it up.

Honda automobile Type R models are special performance editions of their respective model families. The design of Type R models was originally focused on race conditions, with an emphasis on minimizing weight, and maximizing performance potential (e.g. engine tuning, suspension set-up). Thus, Type R models were first conceived for racetracks. However, due to Honda's increased focus on their highly regarded VTEC engines, the Type R was eventually designed for a much wider market. Go search more on wiki about the R. Basically, R is race edition and si is standard one or basic street type car. You will def able to buy plenty of Si and R spare parts in UAE market even if you are importing car from outside. But Honda dealer might act little bit upset while fixing your imported car (rem that).

There is one fit perfect only comes from company. And i am very sure you dont want that expensive one thats why you are looking for aftermarket one. For that you need to search a bit in deira naif or satwa car accessories market. Satwa is small with 5-10 shops and deira naoif has 50-100 shops.

i agree zubs sharjah has a lot of options too Sharjah Industrial area have good workshops.

the brakes can be adjusted by a mechanic as you need special tools to do this. found this video http://www.ehow.com/video_2327566_make-final-adjustments-car-brakes.html

this is in my experience not possible but if you go to the dealer's workshop they may be able to do it.

there are a lot of service centers that do good servicing why then do you want to get it done at a petrol station.

good post must read

As per RTA standard if welding job on chasis is not done by copper welding then its not good, that's there belief is. You can find many good garage doing this chassis repair job. Technical garage in al quoz one of my favorite or you can go to Auto Zone in Rashidiya, Um Ramool they are also good. Google their numbers as i dont have that i just know the location.

Dont you know its hot weather started in engine. SO ur car is over thinking and telling you what lies ahead. Just kiding bro. If you change water sending temp sensor then all i can say its a faulty gauge and most expensive thing to change. Sorry bro.

Without the boot, i dont think its advisable to use. It might make noise and do more damage to whole steering geometry (probably).

18 inch rims for Civic?????????????? Are you serious mate... Never heard that big size for civic tires.

There are plenty of good garage in al quoz area, like technical garage, Max Garage, Icon autos etc.

the difference between the two is of the octane level that is higher in Super which is better for the car overall.

the filters also need to be changed.

For Removing the Starter:- 1. Disconnect the battery cables 2. Remove exhaust pipe A and the inlet manifold bracket 3. Remove the harness clamps and connector from all the clamp. 4. Remove the two bolts securing the starter and remove it from the engine. 5. Disconnect the starter cable from terminal and even the connector from terminal and remove starter. Now to install it back on:- 1. Install the starter cable and connector. Crimp the starter cable from the side of the ring terminal. 2. Install the starter and loosely install the upper lower mounting bolt after both are installed fist tighten the upper bolt and then lower 3. Install the harness clamps and connector on all clamps 4. Install the intake manifold bracket. 5. Install exhaust pipe a new gaskets and self-locking nuts are imp. 6. Connect the battery cables and start the car

Salam Ahmed, Service manual is a paid download available online from many good websites of Haynes, Rave etc. You have to check which one covers your car. Spare part list i really doubt you can get. Honda dealer Trading enterprises here in Dubai, love you keep their NOT REQUIRED UNWANTED importance so that customer always call for each spare part price to their shops. And in spare part shop they employ one person dealing with whole 1000 of request in Dubai, who cant give good customer service to all. But who cares they have 15000000000 staff in sales to sell car, but non to support. Thats the real standard for Trading enterprises. Leave car today and they will touch tomorrow to start diagnose and will call you to inform when finish job after 3 days. Real rolls royce protocol for my Honda civic to diagose and find out it need merely 4 spark plug change. From next time onward i started getting it done in Al quoz workshop, in less than 2 hour in quarter the price and with RESPECT and thank you.

It should be air pocket to remove this air pocket just remove the radiator cap and fill to top Start the engine and wait till the thermostat opens and gets filled to the top and replace cap.