Frederic

Hi @hugo Our location for lunchbreak will be here: https://goo.gl/maps/7MKAic56ARV3cC1P7 This is accessible via the road (you can use Google Maps). I hope to reach that area by 11AM but by 12 we should be leaving from there. Keep me informed on 0 5 6 5 0 4 2 6 3 2

Yes correct ! thanks for noticing, i will adjust it.

DRIVE RSVP IS NOW CLOSED @Bhaskar @Azam the Adventurous @Vasja Zupan @Rasif ABDUL RAHIM @Antony Abraham @Goh KP@Amr Aydin@Bruno Finel @Tom V @hugo @Ahmed Wagdy@Adnan Halepota @AlexM@KKIRAN@Harshal@Danish Mohammad Some pointers: * We will be using Carnity Channel 1 for our radio comms: 446.00625 Mhz * Make sure to bring your flag, radio, deflator, and shovel. Otherwise you will not be accepted to the drive. * Bring your lunch and plenty of drinks. * Please be on time, a bit earlier is always better so we have time for preparation and briefing. We will be exiting around 4PM at this location: https://goo.gl/maps/kDvDT95qyAxAoYcW6 See you all tomorrow at 7AM !

@Azam the Adventurous @Adnan Halepota i have added you both to the drive. Please confirm if you can make it,

Hi @Ahmed Wagdy Yes we will pass by one, but it wont be needed because driving in the wadi is not covering lots of distance and is slow (not 5000+ rpm 😉)

No need for PCR. This drive is only in Sharjah and Fujairah terrain.

@FARAZ MOHAMMED@KKIRAN@Antony Abraham I have added you to the drive. Please confirm if you can make it.

Hi @Luiz Nóbrega Have a look at below post: You will need to complete at least 5 Newbie Level drives before requesting your promotion to Fewbie level. See you soon in the sand !

I am currently in a similar boat that i want to obtain some information and experiences. In the past i have used different cheap Chinese LED beams from Tobys, Auxbeam, etc... which were a great bang for the buck so far, but came to realize the wattages and lumens they advertise are completely off. An example: I recently measured the amps that my Chinese 320W LED bar was drawing with engine running. The LED bar was only drawing 10.5 Amps which would mean ( 13.5 Volts x 10.5 Amps = 140 Watts). Although the LED bar itself works great, we need to stop staring too much at the advertised values and look more at real life reviews from other users (or Youtube ). Baja, Diode, and Rigid are all top brands which would mean they will last for years, be fully waterproof, and the lenses should not fade too soon (which is a concern on the chinese cheap ones). As LED technology was still constantly changing the last couple of years, i found peace in the fact that i was willing to upgrade them every couple of years. I still have 2 LED bars lying around which are 3 years old and don't perform at all like the newer ones. location wise it does indeed depend on what you are aiming to do: - Leading drives (a good flood light with side shooters aka ditch lights might be good). - Camping (good overall lights, less focus on wattage and strength). On a Raptor there is lots of space and lots of options. Dragon Mart has Toby's or other brands, and recently found a shop in DM (S&D Autoparts) who are selling a brand called "Apca" which in fact are chinese as well, but look much better built and the finish looks almost like Baja Designs. I am also keen on giving them a try. Noticed them on @Mahmoud Taha his ride last weekend as well. The Baja Designs Squadron are small fog lights but very powerful. You can probably even get them installed inside the bumper, or use them on the A pillars as ditch-lights. @Karthik Raptor i think has a great light setup as well from what i can remember. And @Alex Raptor can probably also give good advice on that.