pankaj Posted December 12, 2016 Report Share Posted December 12, 2016 My name is pankaj.I own a pajero 2011 model. the problem is when Turing my steering some cracking sound comes from the front wheels. Showed it Habthoor. They are not able to resolve it. Its 2.5 inch lifted. Pls advice a good worshop to resolve the issue . Link to comment Share on other sites More sharing options...
Barry Posted December 14, 2016 Report Share Posted December 14, 2016 Call Location Garage on 0521742967. I am chief technician and I specialise in pajeros as many members on here will testify. Link to comment Share on other sites More sharing options...
pankaj Posted December 16, 2016 Author Report Share Posted December 16, 2016 Thanks Barry. Will contact tomorrow. Link to comment Share on other sites More sharing options...
Derick Posted December 17, 2016 Report Share Posted December 17, 2016 Have you got the axle boot checked for cracks or leaking grease. If boots are completely torn and dry then get them change at the earliest before they damage the axle grooves itself, which will be too expensive to change. This change of axle boot in Pajero's is also quiet involved job and might cost you good money, but it's worth changing them as a schedule maintenance which is good for 40k-50k kms easy with Mitsubishi original spare parts. Link to comment Share on other sites More sharing options...
Baraz Posted December 21, 2016 Report Share Posted December 21, 2016 Well if car is lifted then this noise may be coz of drive shaft angle got distorted after the 2.5 inch lift. At least that's a known cause in Jeep wrangler. Solution is easy, to install a spacer under the transfer case to lower the drive shaft angle to correct the geometry. 1 Link to comment Share on other sites More sharing options...
Barry Posted December 22, 2016 Report Share Posted December 22, 2016 I checked this out a couple of days ago. Initially I suspected it would be the driveshafts too but on further investigation I was able to replicate the noise using a prybar at the side of the diff mount bushings. Had a look at the bushings and they were in bad shape. The rubber is deteriorated and cracked. 1 Link to comment Share on other sites More sharing options...
pankaj Posted December 22, 2016 Author Report Share Posted December 22, 2016 11 hours ago, Baraz said: Well if car is lifted then this noise may be coz of drive shaft angle got distorted after the 2.5 inch lift. At least that's a known cause in Jeep wrangler. Solution is easy, to install a spacer under the transfer case to lower the drive shaft angle to correct the geometry. Barry checked it and identify the issue. He will fix it on saturday. Thanks for great support from all. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now