Jump to content
  •  

harrypotter

Members
  • Posts

    9
  • Joined

  • Last visited

  • Carnity Points

    0 [ Donate ]

harrypotter's Achievements

New Joiner

New Joiner (1/14)

0

Reputation

  1. Take it back to the mechanic and have the wheel bearing checked, keep in mind to get the inner CV checked as well as that there is no brake fluid loss, int wheel area this is the only source of fluid
  2. You cant replace cylinder as its a part of whole block. Instead you replace or clean valve, injectors, lifter/rockers because of which cylinder isnt firing.
  3. Oil burning in combustion chamber means that the piston rings are worn out and not sealing the oil and combustion chamber enough. I personally dont know any shortcut to fix other than changing the piston ring itself. Delay might severe the case, so dont drive for sure. Piston ring change is opening full engine apart to reach rings and its a very specialized job so only seek a qualified technician.
  4. Raise the wiper and flip wiper perpendicular to metal strip and then slide the black plastic out (its a clip lock so u gotto use minus screw driver to open plastic lock) and remove the old wiper and fit new one and slide same plastic in and hear click noise of locking and walla.
  5. you can get in 100 aed from deira naif market or satwa. They will just change the central locking device and give you new remote.
  6. Looks like previous owner fitted bigger tire than the OEM size. Check OEM size and get new tires if your present tires is bigger. If its same, then show to mechanic and ask him to lift the car up and you steer left and right to see what part is rubbing. Get it check soon, it may be serious if its rubbing in OEM size tires.
  7. You can find body parts in opposite Hyatt, in deira, there is a big car accessory and body parts market. Or In shj on BM road till university area, there are few guys selling original and aftermarket parts at 50% discounted rate than Trading ent guys.
  8. Looks like some relay is weak, check all relay and replace the one that looks like burnt or closer to burnt feel.
  9. Dont bother yourself, as every car painter in the world removes the whole old paint and rust by scrubbing with sand paper otherwise new coat wont set in properly. So just let professional handle it neatly.
×
×
  • Create New...

Important Information

Terms of use