adnanz
Members-
Posts
8 -
Joined
-
Last visited
-
Carnity Points
0 [ Donate ]
adnanz's Achievements
New Joiner (1/14)
0
Reputation
-
With the dust conditions here in the UAE .. its good to change the carbon filter like every 20,000 km !! i keep a eye on it since im asthmatic and the dust just gets to me. There are plenty of to-dos over the internet that you can find and im sure you'll find videos as well .. dont worry if its not a peugeot.. they easy to replace so videos can give you an idea.
-
Yeah its important you keep track of the gearbox oil ... helps with the long-running of the car. Its something so basic that every person should know about and should take matters in their own hands. I think for the alternative method you need to access the gearbox from under the car. Then again I cant be sure because i dont know about it. good luck
-
Anyone here know what a BSI RESET is? A lot of technicians/electricians use that option as the bsi control module is connected to everything electrical. The procedure for the reset is a little time-consuming but it apparently puts the control module back to factory specified settings. According to my information, a lot of peugeot faults can be traced back to this control module.
-
Well, I don't want to sound too straightforward here but - Can't u just get the ECU re-mapped? Wouldn't that help your cause ...
-
If vibrating while braking or violently shaking while hard braking then its the brake disc which is getting thinner and thinner. Brake disc should have atleast 4-6mm thick and anything lower than that demands the new set of brake disc. So change the front pair of brake disc as 70% of time front brakes stops the vehicle and front disc get thinner by 3 times faster than rear ones.
-
i got engine oil warning 2 times. should i be worried.
adnanz replied to roggers's topic in Peugeot 508 Forum in UAE
did u have a look at the engine oil if its contaminated or leaking. this should be first thing to check. -
this problem happens when the fuel pump needs checking or it can be the entire fuel line needs checking.
-
What is the reason for my baby to go sluggish when waiting on a signal? this even happens on cold start and after maybe a minute or sometimes less everything is good to go.