gear oil is good

[rader]

which gear oil is good

[bhushandxb]

Check all the oil info, my personal fav

2 - GEARBOX FINAL DRIVE - TRANSFER BOX

units ESSO API standards ACEA standards

BC3 GX 80W90 SJ A2

4HP14 - 4HP18 - MB3 automatic gearbox ESSO ATF D

Part No. 9730.94 (1) (3) - -

4HP20/AL4 automatic gearbox ATF 4HP20/AL4

Part No. 9736.22 (1) (3) - -

manual gearbox MA-BE-ME-ML-BA7-BA10 ESSO GEAR OIL BV 75W80 (1) (3)

Part No. 9736.41 specific to Peugeot -

405 x 4 transfer box ESSO GEAR OIL BT 80W90 (1)

Part No. 9736.19 GL5 -

(1) marketed by Parts Department in 2 litre cans

(3) never use any other grade of oil

units TOTAL API standards ACEA standards

BC3 TM 80W90 SJ/CF A3/B3

4HP14 - 4HP18 - MB3 automatic gearbox TOTAL FLUIDE AT42 - -

4HP20 - AL4 automatic gearbox - - -

manual gearbox MA-BE-ME-ML-BA7-BA10 TOTAL TRANSMISSION BV 75W80

(4) new formula specific to Peugeot -

405 x 4 transfer box TOTAL TRANSMISSION X4 80W90 GL5 -

(4) if another oil has been used, drain and rinse but Never Mix the oils

2 - 3 - REAR FINAL DRIVE

units ESSO API/PEUGEOT standards

conventional rear axle ESSO GEAR OIL VT (5) specific to Peugeot

conventional hypoid rear axle

with limited slip and 405 x 4 ESSO GEAR OIL BT 80W90 (1)

Part No. 9736.19 GL5

(1) marketed by Parts Department in 2 litre cans

(5) if there is no ESSO GEAR OIL VT oil available, use ESSO GEAR OIL GP90 or GX-80W90 after emptying and rinsing the final drive, but never mix the two oils

units TOTAL API/PEUGEOT standards

conventional rear axle TOTAL TRANSMISSION TM

MULTIGRADE 80W90 (4)

TOTAL TRANSMISSION TM 80W90 GL5

conventional hypoid rear axle

with limited slip and 405 x 4 TOTAL TRANSMISSION X4 80W90 GL5

(4) if another oil has been used, drain and rinse but Never Mix the oils