Jump to content

bassim

Members
  • Posts

    40
  • Joined

  • Last visited

  • Carnity Points

    0 [ Donate ]

Posts posted by bassim

  1. Well I can suggest you that you better contact the Jeep showrooms like of Al futtaim, they sell used cars in a reasonable price along with the insurance. You can always ask for the car history, emission test papers. They help you get the car passed by RTA as well. And there is not a single chance that they will do any kind of fraud with you. 

  2. Raiin sensor is a very interesting feature in some of the cars. You can see the rainsensor on your glass pointed outside the car. This sensor is used in case of rainfall. Whenever there is rainfall, ithelps in automatically locking th einterior of the car in order to protect it from rainfall. It also automates the windscrees wipers to operate on its own as per the amount of rainfall. Its a really intersting feature, but you hardly find this feature in UAe as the rainfall in this region is very rear.

  3. Yes you can. Here is the procedure:

    a. in front of radiator support, there are 2 T20 Torx fasteners. First remove that.

    b. Take a screw driver and release the duct off by unscrewing retaining tabs from each side.

    c. Remove the air filter by loosening the hose first. Dont forhet ro disconnect the duct from mass airflow sensor.

    d.then you can replace the air filter with a new one by first removing the air filter hosing lid.

    e. Re install the air filter hosing in the same structure you removed it.

     

    This is how you replace the air filter. Just make sure that the engine is off when you are.doing this.

  4. here it goes: 

     

    1. Put a black trash bag on the non-tinted side of the glass in order to keep that surface away from Ammonia. Meanwhile, cover the tinted surface of the window with soap water. 

     

    2. Spray undiluted ammonia to the tinted-surface. Before that, make everything else inside the car in covered and not to be seen. 

     

    3. Now put the plastic sheet on top of the ammonia surface. Keep it like for a while in l=sunlight to get it soaked. 

     

    4. Peel it off after an hour or so and remove the black trash bag from the non-tinted side. 

×
×
  • Create New...

Important Information

Terms of use