Jump to content

jamesd

Members
  • Posts

    15
  • Joined

  • Last visited

  • Carnity Points

    0 [ Donate ]

Posts posted by jamesd

  1. More than likely it will and it should fit, im 90% sure. As they both share same platform and same US build. It must have had just cosmetic shape change for different league and base bracket and screw positions must be absolutely same.

    You can check many scrap yard in back side of Troy university in sharjah. If you coming from sahara center mall from Dubai to Sharjah, then from Troy University signal take right and all scrapyard are lined up on right side.

  2. its a very simple procedure and if you have had your hands in such thing it will not be difficult.

    First place a bucket below the the radiator and drain the system by opening the petcock fitting near the bottom.

    Remove the clamps from your old hose with a pliers or screwdriver it will be a bit hard as with time they get very hard to remove.

    Remove the hose and clean it, then apply a small amount of gasket sealer to the fittings to assure a tight seal with your new hose.

    Slide new set of clamps onto the hose and install them

    Tighten all the clamps, fill the radiator with coolant, and start the engine to check for cooling system leaks.

    best of luck

  3. Well what i can think from back of my mind is get the stuff from them and get it installed here.

    For professional solution you can go to Yellow hat, Dynatrade or there is one shop in karama: right opposite the main entrance of Lamcy mall after the parking lot. Cant rem the name but i have seen big expensive car there for electrical upgrades.

×
×
  • Create New...

Important Information

Terms of use