Joseph Raju

Thank you @Wrangeldfor a smooth and good drive. Really enjoyed it and nice weather also. Today we had a very good convoy and I think everyone enjoyed the drive. Thank you @Wrangeld for the Shoveling tips and @eldose baby for the opportunity.👍

Hello everyone First of all I thank you all for the patients and support during the drive. Special thanks to @Tbone for the special care. During the drive my car went to Limp mode. May be after 1 hour of drive, RPM not going above 2000, even though I hit the accelerator very hard. With the help of @Tboneand @Janarthan tried to reset my car by disconnect battery terminal but it didn’t work. We checked the air filter area and found the air filter inlet hose was loose. We fixed it but still the problem not solved. So I decided to exit the convoy. On the way to workshop I entered one gas station and thought to try the throttle learning process which I saw in carnity advice group before. It worked in my car and everything become normal after doing the procedure. But still I want to know why my car went to limp mode, so continue my travel to workshop. My technician checked my car with Diagnostic tool but didn’t find any error or data mismatch. I explained him everything how limp mode happened and what we done to reset my car. According to him may be because of loose air filter inlet hose the MAF (Mass Air Flow) sensor reading gets wrong and the car went to limp mode. By refitting the Air filter hose and done the relearning of throttle body may be I was able to solve the problem. But still we don’t have a exact conclusion. Now everything is fine with the car and I done the relearning using Computer also. So as conclusion if the car went to limp mode with no warning lamp, check the parts related to air filter like air filter hose, MAF sensor, O2 Sensor etc… for any loose or dust entry. Refit / Clean it and remove the battery terminal and wait for 1 or 2 mins. If the error is a glitch in sensor then it will be reset. If the problem not solved then do the relearning of throttle body ( For Nissan vehicles). I think limp mode can be overcome by these procedure. But if there is any warning lamp or still the problem exists it better to visit your technician and have a look🙂

Hi @M.Seidam I can’t join on Sunday Morning drive. Removing my RSVP. Thank you

Congratulations @Jessica Lambert

Congratulations @Abdul Basit Khan

Congratulations @Simon Dawood

Congratulations @Tom B

Thank you @Mehmet Volga for the amazing drive today. The drive was full of excitement. We got some refusals, Shoveling, tug, pop out to learn recovery processes and drive had technical, side slop, ridge ride and crossing everything. Special thanks @Simon Dawood for being CF and supporting the convoy throughout the drive. I think everyone got amazing experience today and enjoyed. See you all in desert next time.