Jack wooden board

[Hisham Masaad]

On 6/25/2021 at 10:12 AM, WaYan said:

Ho @Hisham Masaad sorry for the delay in replying.  Can i have one board as well if still available.  I can pick up anywhere.

Thanks a lot

 

 

Apologies @WaYan for the late reply. It is ready, you can collect any time. Please WhatsApp me on 0506318834 to send you location

On 6/28/2021 at 12:36 PM, Anand Nataraj said:

@Hisham MasaadHi Hisham, unfortunately the board which i got was small and i couldn't use it. Let me know if i can replace it with slightly bigger one. If possible i'll get it directly from you as we are on the same ride this week

Apologies @Anand Nataraj for the late reply. The board is ready, and I always  carry a board with me, dont which drive we were together. Anyway board is ready you can collect, or check if any other way to receive it

[Cristian]

On 5/26/2021 at 12:22 PM, Hisham Masaad said:

Dear @Carnity members, pleased to offer Jack wooden board, free of cost, just collect it😀. Unless I am on the same drive, I can bring with me. Board will be made as attached photo, in different types of wood, depends on availability of wood. Please advise who wants to have one, to prepare together. Thanks

3 years later... does this place still exist to go and buy a board?

Thanks!

[Luke K P]

7 hours ago, Cristian said:

3 years later... does this place still exist to go and buy a board?

Thanks!

@Aser just made a couple at ACE Hardware.
Its wood, and fits under the jack. Perfect really.

[Cristian]

21 hours ago, Luke K P said:

@Aser just made a couple at ACE Hardware.
Its wood, and fits under the jack. Perfect really.

ok thanks. I went recently there but couldn't choose the right one, I felt most of them were quite thin.

@Aser what size did you get there?

[Aser]

I took a big one a made two boards for Luke and me, the boards are 50x25cm and lifted a Pajero perfectly.

I used the big one under the one being measured in the picture.

Here you can see it with some leftovers 😅 It is thick enough don't worry.

[Cristian]

On 10/22/2024 at 2:02 PM, Aser said:

I took a big one a made two boards for Luke and me, the boards are 50x25cm and lifted a Pajero perfectly.

I used the big one under the one being measured in the picture.

Here you can see it with some leftovers 😅 It is thick enough don't worry.

All right, thanks a lot for the details @Aser!