2 Traction control icons

[INSTINCT]

This question is for jeep gladiator sports. 2021 i have 2 icons for traction control on the speedometer. But switch is for one. Even when electronic stability is off only one icon shows. But i have 2 icons on speedometer. I have attached for illustrative purpose no clue what its for and how to keep that off/on. If someone has any clue im all ears.

[Andrew John Melvill]

Hi, glad you have asked after our discussions last weekend. @Aser do you have any answers for him. 

[Aser]

As far as I know this how it works:

Single press, partial TC off (off icon on)

To fully switch it off you need to keep the button pressed for 7 seconds.

The bottom icon is only for when the tc is actuating due to loss of traction, it will flash briefly.

[RiadJL]

As Aser said, the top icon lights up when you switch TC off. The bottom one lights up when the computer senses there is low traction. I have both lights on when I use my kill switch - I guess the bottom one also lights up (and stays lit) if TC/ESC are completely off 

[Luke K P]

dont forget to turn off the auto-start-stop so that your ESC  / TSC doesnt keep re-enabling itself. 👍

[Aser]

Also when going from 4low to 4h it will reengage tc

[Gaurav]

On 12/13/2024 at 9:21 AM, Aser said:

As far as I know this how it works:

Single press, partial TC off (off icon on)

To fully switch it off you need to keep the button pressed for 7 seconds.

The bottom icon is only for when the tc is actuating due to loss of traction, it will flash briefly.

This is correct.

Traction control switch off (partially) or long-press (7 sec) for ESP - Electronic Stability Control Off - to be used only while off-roading and not on the road at 70 miles. Traction control is a road safety feature.