Y62 platinum 2019 off road kit ideas

[Caldon]

Hi Team, 

Hope you're well. 

Some brilliant information there. I'm about to purchase a Nissan Patrol, so would be great to know where to start and then I'll use the above to modify accordingly. 

I also saw this, not sure if of use? 

I look forward to hearing from you. 

Thanks,

Caldon
 

 

[_luke_]

44 minutes ago, Caldon said:

Hi Team, 

Hope you're well. 

Some brilliant information there. I'm about to purchase a Nissan Patrol, so would be great to know where to start and then I'll use the above to modify accordingly. 

I also saw this, not sure if of use? 

I look forward to hearing from you. 

Thanks,

Caldon
 

 

Once you decide you like off-roading,.. a bumper trim / different bumper is essential.
 

[Gaurav]

If you are buying Y62 for 90% city use and 10% off-road at newbie and fewbie levels, it makes sense to trim the bumper and body protection is essential.

If you plan to buy this as a dedicated off-road toy you will regret it due to electronics, heavy weight and too expensive to maintain for weekly off-roading.

[cja_aus]

On 2/28/2021 at 2:59 PM, Lawrence_Chehimi said:

Hi @Rawad Bahsas, I have the same vehicle, I installed a bash plate and trimmed the bumper. you will find all details on the below link, my Vehicle has a radar as well so he made me an opening in the bash plate so the radar functions normally.

The bash plate is 8mm thick, you also use an original desert bumper, so it fits perfectly (you get it from scrap yard for 150 AED).

this guy also adds a steel wing bracket which gets attached to the factory crash bar, also adds a galvanized steel cover to minimize any sand intrusion to the engine bay.

the most important part is that no additional holes were drilled, only used existing openings.

i didn't install a light bar, rather i preferred to keep this area clear for proper ventilation, I bought a set of Baja squadron sports LED lights and planning to install them next week on the lower side of the bumper. will share photos once done.

Hi @Lawrence_Chehimi - can you please let me know where you had your work done?

[vinayak n]

Driving a 2023 y 62 ,hi on my first drive i got my front skid plate bend in the middle ,on the second drive too ,is there anyway to minimize  this bending issue ?& will the repeated bend cause an issue to my vehicle ?I  am running on a stock off road bumper form nissan 

Edited June 10, 2024 by vinayaknam