tayyer Posted June 5, 2011 Report Share Posted June 5, 2011 please tell me how can i check if my MAF sensor is working or not? thanks Link to comment Share on other sites More sharing options...
mazin Posted June 5, 2011 Report Share Posted June 5, 2011 Most simple check for MAF is, remove the wiring connector behind MAF socket while car is running, if car stalls then MAF is fine and if car still keep on running after little hesitation then that means MAF isn't working fully. Btw dude, MAF is quite expensive. If its not fully working, take the red can choke/carburetor cleaner and spray some inside the vacuum area from air filter compartment and let it sit for minutes and then start the car and give very slow rev and repeat the spray and when stalls wait again for 5 mins. Do this 2 cycle and you will see the change for sure. Link to comment Share on other sites More sharing options...
tayyer Posted June 21, 2011 Author Report Share Posted June 21, 2011 thank you mazin Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now