Jump to content

Mukundan Nair

Members
 View Profile  See their activity

  • Posts

    193

  • Joined

  • Last visited

  • Country

    United Arab Emirates

  • Carnity Points

    1 [ Donate ]

 Content Type 

Posts posted by Mukundan Nair

    • Popular Post
    • Popular Post

    4x4 not engaging

    in Nissan Xterra Forum in UAE

    Posted · Edited by Mukundan Nair
    Updated text

    Hi ,

    Seems it was a stuck relay, did the self diagnose.  In the engine bay on left side you can find the relay box. It was relays No:7 &9. removed them cleaned and gave a tap. Reinstalled them and the issue is resolved. Not sure though what has caused it in the first place and hoping it wont repeat.

    Thanks for the inputs @Gaurav @Mohamed Seidam & ABS kill switch not yet installed, is it really necessary?

    Below are steps on how to do the self diagnose  (without a tool) and the flash code chart, might help someone out later..

    " If the engine starts when there is something wrong with the 4WD system, the 4WD warning lamp turns ON or
    flickers in the combination meter. When the system functions properly, the warning lamp turns ON when the
    ignition switch is turned to “ON”, and it turns OFF after engine starts. To locate the cause of a problem, start
    the self-diagnosis function. The 4WD warning lamp in the combination meter will indicate the problem area by
    flickering according to the self-diagnostic results. Refer to DLN-59, "DTC Index".
    Diagnostic Procedure (A/T models)
    1. Warm up engine.
    2. Turn ignition switch “ON” and “OFF” at least twice, and then turn ignition switch “OFF”.
    3. Move A/T selector lever to “P” position.
    4. Turn 4WD shift switch to “2WD” position.
    5. Turn ignition switch “ON”. (Do not start engine.)
    6. 4WD warning lamp should turn ON.
    If 4WD warning lamp does not turn ON, refer to DLN-72, "Diagnosis Procedure".
    7. Move A/T selector lever to “R” position.
    8. Turn 4WD shift switch to “2WD”, “4H” and “2WD” in order.
    9. Move A/T selector lever to “P” position.
    10. Turn 4WD shift switch to “4H”, “2WD” and “4H” in order.
    11. Move A/T selector lever to “N” position.
    12. Turn 4WD shift switch to “2WD” position.
    13. Move A/T selector lever to “P” position.
    14. Read the flickering of 4WD warning lamp.

     

    111111111111111_zps7ad4937a.jpg

    • Well Done (+2) 13

  8. 4x4 not engaging

    in Nissan Xterra Forum in UAE

    Posted

    Team, 

    Really would require your support here, from today during our morning drive the 4WD warning light lit up while tried shifting to 4H from 4L. It went off after restarting the vehicle, however now if i try shifting from 2WD to 4H the display blinks and goes blank. The 4WD warning is showing up. Not sure even it is shifting. have anyone experienced such issues with your Xterra's. 

    Appreciate everyones input on the matter, any checks i can do / solve myself or do i need to take to garage?

     

    Thanks in advance

     

    Mukundan

    • Like (+1) 2

  24. RTA approval for adding Stickers on our car

    in Nissan Xterra Forum in UAE

    Posted

    Hi All

    This is a general discussion topic, couldn’t find a category so posted here. Can anyone advise if we require to register or seek approval with Dubai RTA if we add any stickers on to our car? If so what is the procedure? Recently have added below shown on our car. 


    Much appreciated if someone can advise, don’t want to get a hefty fine for a low cost sticker. Thanks in advance.

     

    Mukundan

    F7B87068-C4FE-494F-B4A9-9AC05D672BC1.jpeg

    6DC6F2A4-58D9-4E70-93FA-D802DD40C68C.jpeg

    • Like (+1) 2
×
×
  • Create New...

Important Information

Terms of use

  I accept