peterpan Posted December 30, 2010 Report Share Posted December 30, 2010 my ford five hundred 2004 has got codes for p0109 p0191 p0171 what would be the first thing to check? Link to comment Share on other sites More sharing options...
akbar Posted January 6, 2011 Report Share Posted January 6, 2011 OBD II P0109 Fault Code Definition The Manifold Absolute Pressure Sensor/Barometric Pressure Sensor measures the rise and fall of the air pressure inside the Intake Manifold. This provides critical data needed for the Power Train Control Module (PCM) to control the Air Fuel Ratio, the Ignition Spark Timing, and many components of the Emissions Control Systems. The Manifold Absolute Pressure/Barometric Pressure Sensor converts the Intake Manifold air pressure into a voltage that is high when the Intake Manifold air pressure is high and low when the Intake Manifold air pressure drops to a vacuum. The P0109 code indicates an intermittent or erratic voltage signal from the MAP to the PCM. Symptoms * Check Engine Light will illuminate * In many cases, no abnormal symptoms may be noticed * In some cases, the engine may be hard starting and/or get poor fuel economy * In some cases, noticeably poor engine performance may occur Common Problems That Trigger the P0109 Code * Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is defective * Intake Manifold vacuum leaks * Faulty or corroded Manifold Absolute Pressure Sensor/Barometric Pressure wiring or connections Common Misdiagnoses * Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real cause is a vacuum leak * MAP Sensor is replaced when the real issue is a problematic EGR Valve * Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real problem is a defective Idle Air Control Motor, which causes a very low engine idle OBD II Code P0171 and P0174 Fuel System Too Lean (Bank 1 or 2) Our emissions expert has put together the following information about the P0171 and P0174 fault code. We have also included diagnostic procedures you can take to your repair shop if the mechanic is having difficulty analyzing the code. OBD II Fault Code * OBD II P0171 * OBD II P0174 Fault Code Definition * OBD II P0171 Fuel System Too Lean (Bank 1) * OBD II P0174 Fuel System Too Lean (Bank 2) Symptoms * Check Engine Light will illuminate * In some cases, no adverse conditions may be noticed by the driver * In other cases, there may be performance problems, such as a lack of power on acceleration and some "coughing" or misfiring * The vehicle may have trouble idling, especially when warm or when sitting at a stoplight Common Problems That Trigger the P0171 and P0174 Code * PCM software needs to be updated * Vacuum leaks (Intake Manifold Gaskets, vacuum hoses, PCV hoses, etc.) * Mass Airflow Sensor (MAF) * Plugged Fuel Filter or weak Fuel Pump * Plugged or dirty Fuel Injectors Common Misdiagnosis * Oxygen Sensors Link to comment Share on other sites More sharing options...
peterpan Posted January 3, 2013 Author Report Share Posted January 3, 2013 akbar wrote: > OBD II P0109 > > Fault Code Definition > The Manifold Absolute Pressure Sensor/Barometric Pressure Sensor measures > the rise and fall of the air pressure inside the Intake Manifold. This > provides critical data needed for the Power Train Control Module (PCM) to > control the Air Fuel Ratio, the Ignition Spark Timing, and many components > of the Emissions Control Systems. The Manifold Absolute Pressure/Barometric > Pressure Sensor converts the Intake Manifold air pressure into a voltage > that is high when the Intake Manifold air pressure is high and low when the > Intake Manifold air pressure drops to a vacuum. The P0109 code indicates an > intermittent or erratic voltage signal from the MAP to the PCM. > > Symptoms > > * Check Engine Light will illuminate > * In many cases, no abnormal symptoms may be noticed > * In some cases, the engine may be hard starting and/or get poor fuel > economy > * In some cases, noticeably poor engine performance may occur > > Common Problems That Trigger the P0109 Code > > * Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is > defective > * Intake Manifold vacuum leaks > * Faulty or corroded Manifold Absolute Pressure Sensor/Barometric > Pressure wiring or connections > > Common Misdiagnoses > > * Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is > replaced when the real cause is a vacuum leak > * MAP Sensor is replaced when the real issue is a problematic EGR Valve > * Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is > replaced when the real problem is a defective Idle Air Control Motor, which > causes a very low engine idle > > > > > > > > > OBD II Code P0171 and P0174 > > Fuel System Too Lean (Bank 1 or 2) > > Our emissions expert has put together the following information about the > P0171 and P0174 fault code. We have also included diagnostic procedures you > can take to your repair shop if the mechanic is having difficulty analyzing > the code. > > OBD II Fault Code > > * OBD II P0171 > * OBD II P0174 > > Fault Code Definition > > * OBD II P0171 Fuel System Too Lean (Bank 1) > * OBD II P0174 Fuel System Too Lean (Bank 2) > > Symptoms > > * Check Engine Light will illuminate > * In some cases, no adverse conditions may be noticed by the driver > * In other cases, there may be performance problems, such as a lack of > power on acceleration and some "coughing" or misfiring > * The vehicle may have trouble idling, especially when warm or when > sitting at a stoplight > > Common Problems That Trigger the P0171 and P0174 Code > > * PCM software needs to be updated > * Vacuum leaks (Intake Manifold Gaskets, vacuum hoses, PCV hoses, etc.) > * Mass Airflow Sensor (MAF) > * Plugged Fuel Filter or weak Fuel Pump > * Plugged or dirty Fuel Injectors > > Common Misdiagnosis > > * Oxygen Sensors never thanked you so thank you. need some more advise pls. what car batter should i be going for that is zero maintenance and has long life? Link to comment Share on other sites More sharing options...
peterpan Posted January 19, 2013 Author Report Share Posted January 19, 2013 bought a brand now mustang thanks again for the advise. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now