Jump to content
Advertise here

how can i change the Horn of 2008 Land Rover


Recommended Posts

you must first check the horn fuse if it is working as replacing the fuse will a money and time saving change

If the fuse is good then the horn has to be changed

Below is the procedure :-

a) First disconnect the ground wire from the battery.

Description of the wire is a black wire extending from the battery to the frame of the vehicle.

B) Second is to locate the car's horn.

Description it is under the hood in one of three places usually:

it could be near the car's battery OR above the left or right wheel-well or near the front grille.

Disconnect the power supply wire from the rear of the horn. Then place it into the replacement horn.

c) Mount the horn to the vehicle.

Description remove and replace the entire mounting bracket. by using a screwdriver (kind varies, usually Phillips). and also you will need to prepare receiving holes for the remounting.

d) To finish the process just reconnect the battery grounding wire and test the horn.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of use