tailwind Posted January 1, 2019 Report Share Posted January 1, 2019 Hi, For past week or so, my RX350 (2015) infotainment system resets automatically. Often on startup the audio is in OFF state, while I had left it on on last switch off. On many instances, on powering the vehicle on, the system appears to 're-boot' it self with a message appearing "System setup, Do not power off". After that the nav is it max zoom out, HUD brightness gets to max and radio starts at 87.5. Any advice or similar experiences? Happy New Year 1 Link to comment Share on other sites More sharing options...
Gaurav Posted January 1, 2019 Report Share Posted January 1, 2019 Happy New Year, Maybe worth checking if the battery terminals are loose and causing the system to reset while starting the vehicle. 1 Let's root for each other & watch each other grow. Link to comment Share on other sites More sharing options...
tailwind Posted January 1, 2019 Author Report Share Posted January 1, 2019 Thanks, will try that Link to comment Share on other sites More sharing options...
Barry Posted January 1, 2019 Report Share Posted January 1, 2019 There is a permanent live power supply to the head unit to keep the memory after you switch the vehicle off. There’s a problem with that somewhere. Check your fuses, it’s probably the same one as the cigarette lighter. 1 Link to comment Share on other sites More sharing options...
tailwind Posted January 1, 2019 Author Report Share Posted January 1, 2019 Thanks. Found the bty -ve terminal loose. Tightened same, if doesn't fix, will chk the fuse. 1 Link to comment Share on other sites More sharing options...
Gaurav Posted January 2, 2019 Report Share Posted January 2, 2019 19 hours ago, tailwind said: Thanks. Found the bty -ve terminal loose. Tightened same, if doesn't fix, will chk the fuse. Thanks for the update, do let us know if the infotainment system still reboots the next day or not....? 1 Let's root for each other & watch each other grow. Link to comment Share on other sites More sharing options...
tailwind Posted January 2, 2019 Author Report Share Posted January 2, 2019 Yea, its has not repeated yet. I left the bty terminal detached for 15 mins and then re connected properly tightened. So far so good. 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now