Barry Posted October 6, 2019 Report Share Posted October 6, 2019 4 hours ago, Sidshk said: After change of Solenoid vibration after 100 Kms is gone and car is quite stable But still it Vibrates on Gear and Reverse, Also hesitates when Fan cuts off Engine is misfiring. The most common sign for Bad Coil, Any suggestion to check if which Coils is gone ? Plug the car in. Open up live data and look at misfire indicator. It will tell you exactly which cylinder the problem is on. Basic stuff, any mechanic worth his salt should pick this up first time 1 1 Link to comment Share on other sites More sharing options...
DiamondDallas Posted October 7, 2019 Report Share Posted October 7, 2019 (edited) @Barry this reminds me of OLD Pajero days. You fixed it with your eyes closed. I am sure by this time you got your PHD in Pajeros. I really thought you could fix Pajeros ONLINE by now. Regarding the differential flashing light. My Pajero had loose pipe which was fixed by OIL change attendant and my 4x4 was fine after that. Edited October 7, 2019 by DiamondDallas 1 1 Link to comment Share on other sites More sharing options...
Sidshk Posted October 9, 2019 Author Report Share Posted October 9, 2019 On 10/6/2019 at 6:23 PM, Barry said: Plug the car in. Open up live data and look at misfire indicator. It will tell you exactly which cylinder the problem is on. Basic stuff, any mechanic worth his salt should pick this up first time Tried with Multiple Garages some cannot connect and which connects cannot tell anything Changed 2 Coils but still vibrations on Idle , more while stopping in D 1 Link to comment Share on other sites More sharing options...
Srikumar Posted October 9, 2019 Report Share Posted October 9, 2019 Did you check your mounts? 1 1 Link to comment Share on other sites More sharing options...
Sidshk Posted October 9, 2019 Author Report Share Posted October 9, 2019 4 minutes ago, Srikumar said: Did you check your mounts? Mounts are good , grainy vibration while driving 1 Link to comment Share on other sites More sharing options...
shadow79 Posted October 9, 2019 Report Share Posted October 9, 2019 I do have a scanner and if you have time to come to Ajman then I can hook it up and see if we can pull some codes And regarding the engine mounts even if it's ripped in 2 you can visually check unless you test them... 1 1 Link to comment Share on other sites More sharing options...
Sidshk Posted October 9, 2019 Author Report Share Posted October 9, 2019 Just now, shadow79 said: I do have a scanner and if you have time to come to Ajman then I can hook it up and see if we can pull some codes And regarding the engine mounts even if it's ripped in 2 you can visually check unless you test them... Thanks saleem bhai , I will call u shortly 1 Link to comment Share on other sites More sharing options...
Sidshk Posted October 21, 2019 Author Report Share Posted October 21, 2019 (edited) Final Update Vibration was due to 1 teeth missing , Last night we opened everything again and found out left side Belt was missed by 1 1/2 timing. It took me 6 Sparks Plug, 2 coil and cleaning of Injectors to find out this cause. in this course my Manifold was damaged due to wrong fitting. Finally the vibrations are gone, but will drive for a week to see if it returns Edited October 21, 2019 by Sidshk 2 Link to comment Share on other sites More sharing options...
Frederic Posted October 21, 2019 Report Share Posted October 21, 2019 19 minutes ago, Sidshk said: Final Update Vibration was due to 1 teeth missing , Last night we opened everything again and found out left side Belt was missed by 1 1/2 timing. It took me 6 Sparks Plug, 2 coil and cleaning of Injectors to find out this cause. in this course my Manifold was damaged due to wrong fitting. Finally the vibrations are gone, but will drive for a week to see if it returns Now i would assume you whipped that mechanic across the head with a size 32 spanner ? Who will bear all the costs here ? 1 "Go as far as you can see; once you get there, you'll be able to see further." Link to comment Share on other sites More sharing options...
Sidshk Posted October 21, 2019 Author Report Share Posted October 21, 2019 Just now, Frederic said: Now i would assume you whipped that mechanic across the head with a size 32 spanner ? Who will bear all the costs here ? I wish i could 🥵 , Damage done lesson learned 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now