humsafar Posted December 21, 2011 Report Share Posted December 21, 2011 last weekend I was Driving over the Sand Dunes with lot of Bumps due to zillion previous tracks, and my car was jolting harshly, then all of sudden the Washer Fluid warning light came on, After the Drive, I checked and found that the Fluid was at around 1/2 level, still i filled it to maximum, but the light did not switched off. I tried to hit the bottle to replicate the jerks and jolts it received during the drive, still no result, then I took out the main Switch/Plug from the bottle, remove the negative battery terminal and let it sit there for half an hour, then I plugged these back again, but still the light is on. Can any one suggest any solution ? Link to comment Share on other sites More sharing options...
sihan Posted December 22, 2011 Report Share Posted December 22, 2011 See if washer is still working or not? If not then see the water jet, hose, or electric connection is loose??????? If it works, then probably you need to get that fault cleared up with computer diagnostic system. Link to comment Share on other sites More sharing options...
humsafar Posted December 22, 2011 Author Report Share Posted December 22, 2011 Washer is working perfectly, Checked with Computer Diagnostic Machine, there is no Fault Code appearing. But Just this annoying light is ON in Speedometer, Link to comment Share on other sites More sharing options...
Massaget Posted February 26, 2012 Report Share Posted February 26, 2012 Washer is working perfectly, Checked with Computer Diagnostic Machine, there is no Fault Code appearing. But Just this annoying light is ON in Speedometer, Check fuse in a fuse box(under steering) Link to comment Share on other sites More sharing options...
humsafar Posted February 27, 2012 Author Report Share Posted February 27, 2012 CHecked the fuse, every thing is fine, i guess it is the switch inside the bottle that is malfunctioning Link to comment Share on other sites More sharing options...
Massaget Posted February 27, 2012 Report Share Posted February 27, 2012 CHecked the fuse, every thing is fine, i guess it is the switch inside the bottle that is malfunctioning There is no switch-there is two motor,check they Link to comment Share on other sites More sharing options...
kjz Posted March 7, 2012 Report Share Posted March 7, 2012 You might have a faulty device. Link to comment Share on other sites More sharing options...
daved Posted April 29, 2012 Report Share Posted April 29, 2012 Were you able to get the answer for your question yet? If not, is there a reset / select button for the windshield fluid indicator? It is usually on a controller where you just need to click the "select" and it should reset. Link to comment Share on other sites More sharing options...
humsafar Posted April 30, 2012 Author Report Share Posted April 30, 2012 i guess it is the connection or the on-off triger, because the light goes off with some bumps, and after some time agan come back if car is driven in sandy payches with jerks Link to comment Share on other sites More sharing options...
daved Posted April 30, 2012 Report Share Posted April 30, 2012 Were you able to have it fixed then? Also the fluid is constantly full right? I mean there are no leaks on the container. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now